GitLab Geo configuration

Note: This is the documentation for the Omnibus GitLab packages. For installations from source, follow the GitLab Geo nodes configuration for installations from source guide.

  1. Install GitLab Enterprise Edition on the server that will serve as the secondary Geo node. Do not login or set up anything else in the secondary node for the moment.
  2. Setup the database replication (primary (read-write) <-> secondary (read-only) topology).
  3. Configure GitLab to set the primary and secondary nodes.
  4. Follow the after setup steps.

This is the final step you need to follow in order to setup a Geo node.

You are encouraged to first read through all the steps before executing them in your testing/production environment.

Setting up GitLab

Notes:

  • Do not setup any custom authentication in the secondary nodes, this will be handled by the primary node.
  • Do not add anything in the secondaries Geo nodes admin area (Admin Area ➔ Geo Nodes). This is handled solely by the primary node.

After having installed GitLab Enterprise Edition in the instance that will serve as a Geo node and set up the database replication, the next steps can be summed up to:

  1. Configure the primary node
  2. Replicate some required configurations between the primary and the secondaries
  3. Configure a second, tracking database on each secondary
  4. Configure every secondary node in the primary's Admin screen
  5. Start GitLab on the secondary node's machine

Prerequisites

This is the last step of configuring a Geo node. Make sure you have followed the first two steps of the Setup instructions:

  1. You have already installed on the secondary server the same version of GitLab Enterprise Edition that is present on the primary server.
  2. You have set up the database replication.
  3. Your secondary node is allowed to communicate via HTTP/HTTPS and SSH with your primary node (make sure your firewall is not blocking that).
  4. Your nodes must have an NTP service running to synchronize the clocks. You can use different timezones, but the hour relative to UTC can't be more than 60 seconds off from each node.
  5. You have set up another PostgreSQL database that can store writes for the secondary. Note that this MUST be on another instance, since the primary replicated database is read-only.

Some of the following steps require to configure the primary and secondary nodes almost at the same time. For your convenience make sure you have SSH logins opened on all nodes as we will be moving back and forth.

Step 1. Adding the primary GitLab node

  1. SSH into the primary node and login as root:

    sudo -i
  2. Execute the command below to define the node as primary Geo node:

    gitlab-ctl set-geo-primary-node

    This command will use your defined external_url in gitlab.rb

Step 2. Updating the known_hosts file of the secondary nodes

  1. SSH into the secondary node and login as root:

    sudo -i
  2. The secondary nodes need to know the SSH fingerprint of the primary node that will be used for the Git clone/fetch operations. In order to add it to the known_hosts file, run the following command and type yes when asked:

    sudo -u git -H ssh git@<primary-node-url>

    Replace <primary-node-url> with the FQDN of the primary node.

  3. Verify that the fingerprint was added by checking known_hosts:

    cat /var/opt/gitlab/.ssh/known_hosts

Step 3. Copying the database encryption key

GitLab stores a unique encryption key in disk that we use to safely store sensitive data in the database. Any secondary node must have the exact same value for db_key_base as defined in the primary one.

  1. SSH into the primary node and login as root:

    sudo -i
  2. Execute the command below to display the current encryption key and copy it:

     gitlab-rake geo:db:show_encryption_key
  3. SSH into the secondary node and login as root:

    sudo -i
  4. Open the secrets file and paste the value of db_key_base you copied in the previous step:

     editor /etc/gitlab/gitlab-secrets.json
  5. Save and close the file.

  6. Reconfigure for the change to take effect.

    gitlab-ctl reconfigure

Step 4. Regenerating the authorized keys in the secondary node

IMPORTANT: Since GitLab 10.0 ~/.ssh/authorized_keys no longer can be used, and this step is deprecated. Instead, follow the instructions on configuring SSH authorization via database lookups (for both primary AND secondary nodes).

Regenerate the keys for ~/.ssh/authorized_keys (HTTPS clone will still work without this extra step).

  1. On the secondary node where the database is already replicated, run:

     # For Omnibus installations
     gitlab-rake gitlab:shell:setup

This will enable git operations to authorize against your existing users. New users and SSH keys updated after this step, will be replicated automatically.

Step 5. Enabling the secondary GitLab node

  1. SSH into the secondary node and login as root:

    sudo -i
  2. Get the contents of id_rsa.pub key that was pre-generated by Omnibus GitLab and copy them:

    sudo -u git cat /var/opt/gitlab/.ssh/id_rsa.pub
  3. Visit the primary node's Admin Area ➔ Geo Nodes (/admin/geo_nodes) in your browser.

  4. Add the secondary node by providing its full URL and the public SSH key you created previously. Do NOT check the box 'This is a primary node'.

  5. Added in GitLab 9.5: Choose which namespaces should be replicated by the secondary node. Leave blank to replicate all. Read more in selective replication.

  6. Click the Add node button.


After the Add Node button is pressed, the primary node will start to notify changes to the secondary. Make sure the secondary instance is running and accessible.

The two most obvious issues that replication can have here are:

  1. Database replication not working well
  2. Instance to instance notification not working. In that case, it can be something of the following:
    • You are using a custom certificate or custom CA (see the Troubleshooting section)
    • Instance is firewalled (check your firewall rules)

Step 6. Replicating the repositories data

Getting a new secondary Geo node up and running, will also require the repositories data to be synced.

With GitLab 9.0 the syncing process starts automatically from the secondary node after the Add Node button is pressed.

Currently, this is what is synced:

  • Git repositories
  • Wikis
  • LFS objects
  • Issue, merge request, and comment attachments
  • User, group, and project avatars

You can monitor the status of the syncing process on a secondary node by visiting the primary node's Admin Area ➔ Geo Nodes (/admin/geo_nodes) in your browser.

Please note that if git_data_dirs is customized on the primary for multiple repository shards you must duplicate the same configuration on the secondary.

GitLab Geo dashboard

Disabling a secondary node stops the syncing process.

With GitLab 8.14 this process is started manually from the primary node. You can start the syncing process by clicking the "Backfill all repositories" button on Admin > Geo Nodes screen.

On previous versions, you can use rsync for that:

Make sure rsync is installed in both primary and secondary servers and root SSH access with a password is enabled. Otherwise, you can set up an SSH key-based connection between the servers.

  1. SSH into the secondary node and login as root:

    sudo -i
  2. Assuming 1.2.3.4 is the IP of the primary node, run the following command to start the sync:

    # For Omnibus installations
    rsync -guavrP root@1.2.3.4:/var/opt/gitlab/git-data/repositories/ /var/opt/gitlab/git-data/repositories/
    gitlab-ctl reconfigure # to fix directory permissions

If this step is not followed, the secondary node will eventually clone and fetch every missing repository as they are updated with new commits on the primary node, so syncing the repositories beforehand will buy you some time.

While active repositories will be eventually replicated, if you don't rsync, the files, any archived/inactive repositories will not get in the secondary node as Geo doesn't run any routine task to look for missing repositories.

Next steps

Your nodes should now be ready to use. You can login to the secondary node with the same credentials as used in the primary. Visit the secondary node's Admin Area ➔ Geo Nodes (/admin/geo_nodes) in your browser to check if it's correctly identified as a secondary Geo node and if Geo is enabled.

If your installation isn't working properly, check the troubleshooting section.

Point your users to the after setup steps.

Selective replication

With GitLab 9.5, GitLab Geo now supports the first iteration of selective replication, which allows admins to choose which namespaces should be replicated by secondary nodes.

It is important to notice that selective replication:

  1. Does not restrict permissions from secondary nodes.
  2. Does not hide projects metadata from secondary nodes. Since Geo currently relies on PostgreSQL replication, all project metadata gets replicated to secondary nodes, but repositories that have not been selected will be empty.
  3. Secondary nodes won't pull repositories that do not belong to the selected namespaces to be replicated.

Adding another secondary Geo node

To add another Geo node in an already Geo configured infrastructure, just follow the steps starting form step 2. Just omit the first step that sets up the primary node.

Additional information for the SSH key pairs

When adding a new secondary Geo node, you must provide an SSH public key for the system user that your GitLab instance runs as (unless changed, should be the user git). This user will act as a "normal user" who fetches from the primary Geo node.

Omnibus automatically generates ~git/.ssh/id_rsa and ~git/.ssh/id_rsa.pub files on secondary Geo nodes. Primaries do not need these files, and you should not create them manually.

Upgrading Geo

Upgrading to GitLab 10.0

Since GitLab 10.0, we require all Geo systems to use SSH key lookups via the database to avoid having to maintain consistency of the authorized_keys file for SSH access. Failing to do this will prevent users from being able to clone via SSH.

Upgrading from GitLab 9.3 or older

If you started running Geo on GitLab 9.3 or older, we recommend that you resync your secondary PostgreSQL databases to use replication slots. If you started using Geo with GitLab 9.4 or 10.x, no further action should be required because replication slots are used by default. However, if you started with GitLab 9.3 and upgraded later, you should still follow the instructions below.

When in doubt, it does not hurt to do a resync. The easiest way to do this in Omnibus is the following:

  1. Install GitLab on the primary server
  2. Run gitlab-ctl reconfigure and gitlab-ctl restart postgresql. This will enable replication slots on the primary database.
  3. Install GitLab on the secondary server.
  4. Re-run the database replication process.

Troubleshooting

See the troubleshooting document.